Contact M-Tech Supply
PHONE: 480-726-2876
FAX: 480-726-2872

Search Fabricating Tools:
Browse Fabricating Tools:

Bend-Tech SE

Quantity: 
Price:  $599.00
 


If you are serious about bending and/or bending is part of your business then SE is for you.

Of course SE provides the ease-of-use found with EZ, the fundamental 3D engineering of EZ3D and the assembly design of PRO. SE provides those extra tools that you will need when you are concerned about setup and production times. What separates SE from the rest is its focus on manufacturability and flexibility in design.

Focus on Manufacturability:

SE checks to verify sufficient material is available for the bending process.
SE can provide a "spring back" bend angles.
SE provides extra checking tools to verify part validity.
SE allows for multiple dies to be used on the same part.
SE has extra functionality for roll bending.
SE provides a graphical layout interface.

Focus on Design Flexibility:

SE has an XYZ interface.
SE provides a Sketch interface to help with some prints.
SE has an advanced LRA "Length, Rotation & Angle" design interface.
SE has a very powerful reverse engineering feature.
SE allows for dxf/dwg interfacing (with the Import/Export module).
SE allows for unit conversion (inches vs. millimeters).

System requirements:

Windows XP, Vista, 7 or 8
CD drive
mouse
1024 x 768 min resolution for graphics
4 gig of RAM
2 gig of hard drive available.

Which Bend-Tech product is best for me?

must have SE if:

- your bender has a rotary index table

- some of your parts have more than one radius

- you receive XYZ data from your customers or engineering department

- need to convert between inches & millimeters

- you need decimal place accuracy for your bend angles or rotations

- have any parts over 10 bends

- you concerned about setup and production time.

- want to import or export dxf files*

 

should have SE if:

- your business depends on bending tube

- you have a bender that is worth more than $5000.00

- you bend tube almost everyday

- desire to have the software help with spring back compensation

 

Comparison Chart

As you will find the Bend-Tech product line is based upon levels.  Each level of product will contain all of the features and functions from its lower levels plus the functions that defines itself.  So as an example; Bend-Tech SE will contain 100% of the function of Bend-Tech PRO, plus have the functions as seen in the chart below that separates itself.

On the left hand side of this page please find some general statements which may help you to determine which product is best for you. 

The chart below shows general functions within the software and may help you to understand the differences between our levels of product.  

Features

EZ

EZ-3D

PRO

SE   

SW   

Multiple Document Interface

x

x

xxx

Customer Defined Tooling & Material Library

x

x

xxx

Calibration Wizard

x

x

xxx

Pre-Defined Templates

x

x

xxx

Templates Available for Download

x

x

xxx

2D Custom Part Template

x

x

xxx

To Scale Shaded Part

x

x

xxx

Cut Length & Weight Results

x

x

xxx

Bend Angle Results

x

x

xxx

Start, End or Center Bend Results

x

x

xxx

Easy to follow Printed Setup Sheet

x

x

xxx

Add Material for Post Bending Cutoff

x

x

xxx

Save Part Files to the Hard Drive

x

x

xxx

Telephone & Email Support

x

x

xxx

Support Forum

x

x

xxx
Bend Limit (per part)66105050

3D Custom Part Template

x

xxx

Tri-Star Input Window

x

xxx
Zooming, Panning & Rotating of 3D Shaded Model

x

xxx

Rotation Results

x

xxx

Reverse Bending Order

x

xxx

Flip Tube in Mid Production

x

xxx

Bending Simulation

x

xxx

Movement Transition Setup Sheet

x

xxx
Trig Calculatorxxxx
Advanced Calibration Wizardxxxx
Rotational input for Custom Part  xxx
Assembly Designxxx
Dimensioningxxx
Cutting (fish-mouthing)xxx
Built-in Spring Back Chartsxxx
Import/Export Modulexx
XYZ Interfacexx
Multiple Dies for Single Partxx
Crowningxx
Graphical Screen Verificationxx
Graphical Layoutxx
Angle & Rotation Output Tolerances up to 3 Decimal Placesxx
Unit conversion in XYZ interface xx
Manufacturability Checking xx
Reverse Engineeringxx
Extended Tooling Library Definitionsxx
LRA Outputxx
Railing Modulexx
SolidWorks Interfacex

 

 


 

There are no images in this product's Gallery

 Shopping Cart
Your Shopping Cart is currently Empty!

 Last Viewed