![]() |
M-Tech Supply https://mtechsupply.com PHONE: 480-726-2876 FAX: 480-726-2872 EMAIL: sales@mtechsupply.com |
![]() |
Contact M-Tech Supply PHONE: 480-726-2876 FAX: 480-726-2872 |
Browse Fabricating Tools:
|
RDB-100 Manual Tube Bender
Manual Rotary Draw Tube & Pipe Bender. 1-3/4" Tube Capacity. Maximum 7" CLR
The RDB-100 is perfect for the industrial fabricator that needs to bend lower production runs with very professional looking bends. Constructed of steel plate the RDB-100 ships mostly assembled with only the handle and stand needing to be attached. Like all top loading tube benders from Baileigh Industrial, the RDB-100 was made to accept hundreds of round and square tubing die sets as well as round pipe dies sets. The RDB-100 is capable of bending up to 1-3/4" OD tubing with a maximum wall thickness of .095" and 1" schedule 40 pipe. The RDB-100 manual tubing bender uses a large diameter indexing plate that allows the operator to bend up to 206 degrees (180 degrees plus spring back) without having to re-index and re-pin common on most other manual tube benders on the market. A tension spring back mechanism holds the position as the bend mechanism grabs the next tooth on the index wheel. When requirements are for lighter gauge materials the RDB-100 ratcheting bend system can be shut off and the handle can be put into a manual override housing that allows the operator to simply walk around the manual bender and bend without the power of the indexing unit. Specifications:
![]() |
![]()
![]()
|